pubsubpb

type AcknowledgeRequest struct {

	// Required. The subscription whose message is being acknowledged.
	// Format is `projects/{project}/subscriptions/{sub}`.
	Subscription string `protobuf:"bytes,1,opt,name=subscription,proto3" json:"subscription,omitempty"`
	// Required. The acknowledgment ID for the messages being acknowledged that
	// was returned by the Pub/Sub system in the `Pull` response. Must not be
	// empty.
	AckIds []string `protobuf:"bytes,2,rep,name=ack_ids,json=ackIds,proto3" json:"ack_ids,omitempty"`
	// contains filtered or unexported fields
}

type BigQueryConfig struct {

	// Optional. The name of the table to which to write data, of the form
	// {projectId}.{datasetId}.{tableId}
	Table string `protobuf:"bytes,1,opt,name=table,proto3" json:"table,omitempty"`
	// Optional. When true, use the topic's schema as the columns to write to in
	// BigQuery, if it exists. `use_topic_schema` and `use_table_schema` cannot be
	// enabled at the same time.
	UseTopicSchema bool `protobuf:"varint,2,opt,name=use_topic_schema,json=useTopicSchema,proto3" json:"use_topic_schema,omitempty"`
	// Optional. When true, write the subscription name, message_id, publish_time,
	// attributes, and ordering_key to additional columns in the table. The
	// subscription name, message_id, and publish_time fields are put in their own
	// columns while all other message properties (other than data) are written to
	// a JSON object in the attributes column.
	WriteMetadata bool `protobuf:"varint,3,opt,name=write_metadata,json=writeMetadata,proto3" json:"write_metadata,omitempty"`
	// Optional. When true and use_topic_schema is true, any fields that are a
	// part of the topic schema that are not part of the BigQuery table schema are
	// dropped when writing to BigQuery. Otherwise, the schemas must be kept in
	// sync and any messages with extra fields are not written and remain in the
	// subscription's backlog.
	DropUnknownFields bool `protobuf:"varint,4,opt,name=drop_unknown_fields,json=dropUnknownFields,proto3" json:"drop_unknown_fields,omitempty"`
	// Output only. An output-only field that indicates whether or not the
	// subscription can receive messages.
	State BigQueryConfig_State `protobuf:"varint,5,opt,name=state,proto3,enum=mockgcp.pubsub.v1.BigQueryConfig_State" json:"state,omitempty"`
	// Optional. When true, use the BigQuery table's schema as the columns to
	// write to in BigQuery. `use_table_schema` and `use_topic_schema` cannot be
	// enabled at the same time.
	UseTableSchema bool `protobuf:"varint,6,opt,name=use_table_schema,json=useTableSchema,proto3" json:"use_table_schema,omitempty"`
	// contains filtered or unexported fields
}

type BigQueryConfig_State int32

type CloudStorageConfig struct {

	// Required. User-provided name for the Cloud Storage bucket.
	// The bucket must be created by the user. The bucket name must be without
	// any prefix like "gs://". See the [bucket naming
	// requirements] (https://cloud.google.com/storage/docs/buckets#naming).
	Bucket string `protobuf:"bytes,1,opt,name=bucket,proto3" json:"bucket,omitempty"`
	// Optional. User-provided prefix for Cloud Storage filename. See the [object
	// naming requirements](https://cloud.google.com/storage/docs/objects#naming).
	FilenamePrefix string `protobuf:"bytes,2,opt,name=filename_prefix,json=filenamePrefix,proto3" json:"filename_prefix,omitempty"`
	// Optional. User-provided suffix for Cloud Storage filename. See the [object
	// naming requirements](https://cloud.google.com/storage/docs/objects#naming).
	// Must not end in "/".
	FilenameSuffix string `protobuf:"bytes,3,opt,name=filename_suffix,json=filenameSuffix,proto3" json:"filename_suffix,omitempty"`
	// Optional. User-provided format string specifying how to represent datetimes
	// in Cloud Storage filenames. See the [datetime format
	// guidance](https://cloud.google.com/pubsub/docs/create-cloudstorage-subscription#file_names).
	FilenameDatetimeFormat string `` /* 130-byte string literal not displayed */
	// Defaults to text format.
	//
	// Types that are assignable to OutputFormat:
	//
	//	*CloudStorageConfig_TextConfig_
	//	*CloudStorageConfig_AvroConfig_
	OutputFormat isCloudStorageConfig_OutputFormat `protobuf_oneof:"output_format"`
	// Optional. The maximum duration that can elapse before a new Cloud Storage
	// file is created. Min 1 minute, max 10 minutes, default 5 minutes. May not
	// exceed the subscription's acknowledgement deadline.
	MaxDuration *duration.Duration `protobuf:"bytes,6,opt,name=max_duration,json=maxDuration,proto3" json:"max_duration,omitempty"`
	// Optional. The maximum bytes that can be written to a Cloud Storage file
	// before a new file is created. Min 1 KB, max 10 GiB. The max_bytes limit may
	// be exceeded in cases where messages are larger than the limit.
	MaxBytes int64 `protobuf:"varint,7,opt,name=max_bytes,json=maxBytes,proto3" json:"max_bytes,omitempty"`
	// Output only. An output-only field that indicates whether or not the
	// subscription can receive messages.
	State CloudStorageConfig_State `protobuf:"varint,9,opt,name=state,proto3,enum=mockgcp.pubsub.v1.CloudStorageConfig_State" json:"state,omitempty"`
	// contains filtered or unexported fields
}

type CloudStorageConfig_AvroConfig struct {

	// Optional. When true, write the subscription name, message_id,
	// publish_time, attributes, and ordering_key as additional fields in the
	// output. The subscription name, message_id, and publish_time fields are
	// put in their own fields while all other message properties other than
	// data (for example, an ordering_key, if present) are added as entries in
	// the attributes map.
	WriteMetadata bool `protobuf:"varint,1,opt,name=write_metadata,json=writeMetadata,proto3" json:"write_metadata,omitempty"`
	// contains filtered or unexported fields
}

type CloudStorageConfig_AvroConfig_ struct {
	// Optional. If set, message data will be written to Cloud Storage in Avro
	// format.
	AvroConfig *CloudStorageConfig_AvroConfig `protobuf:"bytes,5,opt,name=avro_config,json=avroConfig,proto3,oneof"`
}

type CloudStorageConfig_State int32

type CloudStorageConfig_TextConfig struct {
	// contains filtered or unexported fields
}

type CloudStorageConfig_TextConfig_ struct {
	// Optional. If set, message data will be written to Cloud Storage in text
	// format.
	TextConfig *CloudStorageConfig_TextConfig `protobuf:"bytes,4,opt,name=text_config,json=textConfig,proto3,oneof"`
}

type CommitSchemaRequest struct {

	// Required. The name of the schema we are revising.
	// Format is `projects/{project}/schemas/{schema}`.
	Name string `protobuf:"bytes,1,opt,name=name,proto3" json:"name,omitempty"`
	// Required. The schema revision to commit.
	Schema *Schema `protobuf:"bytes,2,opt,name=schema,proto3" json:"schema,omitempty"`
	// contains filtered or unexported fields
}

type CreateSchemaRequest struct {

	// Required. The name of the project in which to create the schema.
	// Format is `projects/{project-id}`.
	Parent string `protobuf:"bytes,1,opt,name=parent,proto3" json:"parent,omitempty"`
	// Required. The schema object to create.
	//
	// This schema's `name` parameter is ignored. The schema object returned
	// by CreateSchema will have a `name` made using the given `parent` and
	// `schema_id`.
	Schema *Schema `protobuf:"bytes,2,opt,name=schema,proto3" json:"schema,omitempty"`
	// The ID to use for the schema, which will become the final component of
	// the schema's resource name.
	//
	// See https://cloud.google.com/pubsub/docs/pubsub-basics#resource_names for
	// resource name constraints.
	SchemaId string `protobuf:"bytes,3,opt,name=schema_id,json=schemaId,proto3" json:"schema_id,omitempty"`
	// contains filtered or unexported fields
}

type CreateSnapshotRequest struct {

	// Required. User-provided name for this snapshot. If the name is not provided
	// in the request, the server will assign a random name for this snapshot on
	// the same project as the subscription. Note that for REST API requests, you
	// must specify a name.  See the [resource name
	// rules](https://cloud.google.com/pubsub/docs/pubsub-basics#resource_names).
	// Format is `projects/{project}/snapshots/{snap}`.
	Name string `protobuf:"bytes,1,opt,name=name,proto3" json:"name,omitempty"`
	// Required. The subscription whose backlog the snapshot retains.
	// Specifically, the created snapshot is guaranteed to retain:
	//
	//	(a) The existing backlog on the subscription. More precisely, this is
	//	    defined as the messages in the subscription's backlog that are
	//	    unacknowledged upon the successful completion of the
	//	    `CreateSnapshot` request; as well as:
	//	(b) Any messages published to the subscription's topic following the
	//	    successful completion of the CreateSnapshot request.
	//
	// Format is `projects/{project}/subscriptions/{sub}`.
	Subscription string `protobuf:"bytes,2,opt,name=subscription,proto3" json:"subscription,omitempty"`
	// Optional. See [Creating and managing
	// labels](https://cloud.google.com/pubsub/docs/labels).
	Labels map[string]string `` /* 153-byte string literal not displayed */
	// contains filtered or unexported fields
}

type DeadLetterPolicy struct {

	// Optional. The name of the topic to which dead letter messages should be
	// published. Format is `projects/{project}/topics/{topic}`.The Pub/Sub
	// service account associated with the enclosing subscription's parent project
	// (i.e., service-{project_number}@gcp-sa-pubsub.iam.gserviceaccount.com) must
	// have permission to Publish() to this topic.
	//
	// The operation will fail if the topic does not exist.
	// Users should ensure that there is a subscription attached to this topic
	// since messages published to a topic with no subscriptions are lost.
	DeadLetterTopic string `protobuf:"bytes,1,opt,name=dead_letter_topic,json=deadLetterTopic,proto3" json:"dead_letter_topic,omitempty"`
	// Optional. The maximum number of delivery attempts for any message. The
	// value must be between 5 and 100.
	//
	// The number of delivery attempts is defined as 1 + (the sum of number of
	// NACKs and number of times the acknowledgement deadline has been exceeded
	// for the message).
	//
	// A NACK is any call to ModifyAckDeadline with a 0 deadline. Note that
	// client libraries may automatically extend ack_deadlines.
	//
	// This field will be honored on a best effort basis.
	//
	// If this parameter is 0, a default value of 5 is used.
	MaxDeliveryAttempts int32 `protobuf:"varint,2,opt,name=max_delivery_attempts,json=maxDeliveryAttempts,proto3" json:"max_delivery_attempts,omitempty"`
	// contains filtered or unexported fields
}

type DeleteSchemaRequest struct {

	// Required. Name of the schema to delete.
	// Format is `projects/{project}/schemas/{schema}`.
	Name string `protobuf:"bytes,1,opt,name=name,proto3" json:"name,omitempty"`
	// contains filtered or unexported fields
}

type DeleteSchemaRevisionRequest struct {

	// Required. The name of the schema revision to be deleted, with a revision ID
	// explicitly included.
	//
	// Example: `projects/123/schemas/my-schema@c7cfa2a8`
	Name string `protobuf:"bytes,1,opt,name=name,proto3" json:"name,omitempty"`
	// Optional. This field is deprecated and should not be used for specifying
	// the revision ID. The revision ID should be specified via the `name`
	// parameter.
	//
	// Deprecated: Do not use.
	RevisionId string `protobuf:"bytes,2,opt,name=revision_id,json=revisionId,proto3" json:"revision_id,omitempty"`
	// contains filtered or unexported fields
}

type DeleteSnapshotRequest struct {

	// Required. The name of the snapshot to delete.
	// Format is `projects/{project}/snapshots/{snap}`.
	Snapshot string `protobuf:"bytes,1,opt,name=snapshot,proto3" json:"snapshot,omitempty"`
	// contains filtered or unexported fields
}

type DeleteSubscriptionRequest struct {

	// Required. The subscription to delete.
	// Format is `projects/{project}/subscriptions/{sub}`.
	Subscription string `protobuf:"bytes,1,opt,name=subscription,proto3" json:"subscription,omitempty"`
	// contains filtered or unexported fields
}

type DeleteTopicRequest struct {

	// Required. Name of the topic to delete.
	// Format is `projects/{project}/topics/{topic}`.
	Topic string `protobuf:"bytes,1,opt,name=topic,proto3" json:"topic,omitempty"`
	// contains filtered or unexported fields
}

type DetachSubscriptionRequest struct {

	// Required. The subscription to detach.
	// Format is `projects/{project}/subscriptions/{subscription}`.
	Subscription string `protobuf:"bytes,1,opt,name=subscription,proto3" json:"subscription,omitempty"`
	// contains filtered or unexported fields
}

type DetachSubscriptionResponse struct {
	// contains filtered or unexported fields
}

type Encoding int32

type ExpirationPolicy struct {

	// Optional. Specifies the "time-to-live" duration for an associated resource.
	// The resource expires if it is not active for a period of `ttl`. The
	// definition of "activity" depends on the type of the associated resource.
	// The minimum and maximum allowed values for `ttl` depend on the type of the
	// associated resource, as well. If `ttl` is not set, the associated resource
	// never expires.
	Ttl *duration.Duration `protobuf:"bytes,1,opt,name=ttl,proto3" json:"ttl,omitempty"`
	// contains filtered or unexported fields
}

type GetSchemaRequest struct {

	// Required. The name of the schema to get.
	// Format is `projects/{project}/schemas/{schema}`.
	Name string `protobuf:"bytes,1,opt,name=name,proto3" json:"name,omitempty"`
	// The set of fields to return in the response. If not set, returns a Schema
	// with all fields filled out. Set to `BASIC` to omit the `definition`.
	View SchemaView `protobuf:"varint,2,opt,name=view,proto3,enum=mockgcp.pubsub.v1.SchemaView" json:"view,omitempty"`
	// contains filtered or unexported fields
}

type GetSnapshotRequest struct {

	// Required. The name of the snapshot to get.
	// Format is `projects/{project}/snapshots/{snap}`.
	Snapshot string `protobuf:"bytes,1,opt,name=snapshot,proto3" json:"snapshot,omitempty"`
	// contains filtered or unexported fields
}

type GetSubscriptionRequest struct {

	// Required. The name of the subscription to get.
	// Format is `projects/{project}/subscriptions/{sub}`.
	Subscription string `protobuf:"bytes,1,opt,name=subscription,proto3" json:"subscription,omitempty"`
	// contains filtered or unexported fields
}

type GetTopicRequest struct {

	// Required. The name of the topic to get.
	// Format is `projects/{project}/topics/{topic}`.
	Topic string `protobuf:"bytes,1,opt,name=topic,proto3" json:"topic,omitempty"`
	// contains filtered or unexported fields
}

type IngestionDataSourceSettings struct {

	// Only one source type can have settings set.
	//
	// Types that are assignable to Source:
	//
	//	*IngestionDataSourceSettings_AwsKinesis_
	Source isIngestionDataSourceSettings_Source `protobuf_oneof:"source"`
	// contains filtered or unexported fields
}

type IngestionDataSourceSettings_AwsKinesis struct {

	// Output only. An output-only field that indicates the state of the Kinesis
	// ingestion source.
	State IngestionDataSourceSettings_AwsKinesis_State `` /* 132-byte string literal not displayed */
	// Required. The Kinesis stream ARN to ingest data from.
	StreamArn string `protobuf:"bytes,2,opt,name=stream_arn,json=streamArn,proto3" json:"stream_arn,omitempty"`
	// Required. The Kinesis consumer ARN to used for ingestion in Enhanced
	// Fan-Out mode. The consumer must be already created and ready to be used.
	ConsumerArn string `protobuf:"bytes,3,opt,name=consumer_arn,json=consumerArn,proto3" json:"consumer_arn,omitempty"`
	// Required. AWS role ARN to be used for Federated Identity authentication
	// with Kinesis. Check the Pub/Sub docs for how to set up this role and the
	// required permissions that need to be attached to it.
	AwsRoleArn string `protobuf:"bytes,4,opt,name=aws_role_arn,json=awsRoleArn,proto3" json:"aws_role_arn,omitempty"`
	// Required. The GCP service account to be used for Federated Identity
	// authentication with Kinesis (via a `AssumeRoleWithWebIdentity` call for
	// the provided role). The `aws_role_arn` must be set up with
	// `accounts.google.com:sub` equals to this service account number.
	GcpServiceAccount string `protobuf:"bytes,5,opt,name=gcp_service_account,json=gcpServiceAccount,proto3" json:"gcp_service_account,omitempty"`
	// contains filtered or unexported fields
}

type IngestionDataSourceSettings_AwsKinesis_ struct {
	// Optional. Amazon Kinesis Data Streams.
	AwsKinesis *IngestionDataSourceSettings_AwsKinesis `protobuf:"bytes,1,opt,name=aws_kinesis,json=awsKinesis,proto3,oneof"`
}

type IngestionDataSourceSettings_AwsKinesis_State int32

type ListSchemaRevisionsRequest struct {

	// Required. The name of the schema to list revisions for.
	Name string `protobuf:"bytes,1,opt,name=name,proto3" json:"name,omitempty"`
	// The set of Schema fields to return in the response. If not set, returns
	// Schemas with `name` and `type`, but not `definition`. Set to `FULL` to
	// retrieve all fields.
	View SchemaView `protobuf:"varint,2,opt,name=view,proto3,enum=mockgcp.pubsub.v1.SchemaView" json:"view,omitempty"`
	// The maximum number of revisions to return per page.
	PageSize int32 `protobuf:"varint,3,opt,name=page_size,json=pageSize,proto3" json:"page_size,omitempty"`
	// The page token, received from a previous ListSchemaRevisions call.
	// Provide this to retrieve the subsequent page.
	PageToken string `protobuf:"bytes,4,opt,name=page_token,json=pageToken,proto3" json:"page_token,omitempty"`
	// contains filtered or unexported fields
}

type ListSchemaRevisionsResponse struct {

	// The revisions of the schema.
	Schemas []*Schema `protobuf:"bytes,1,rep,name=schemas,proto3" json:"schemas,omitempty"`
	// A token that can be sent as `page_token` to retrieve the next page.
	// If this field is empty, there are no subsequent pages.
	NextPageToken string `protobuf:"bytes,2,opt,name=next_page_token,json=nextPageToken,proto3" json:"next_page_token,omitempty"`
	// contains filtered or unexported fields
}

type ListSchemasRequest struct {

	// Required. The name of the project in which to list schemas.
	// Format is `projects/{project-id}`.
	Parent string `protobuf:"bytes,1,opt,name=parent,proto3" json:"parent,omitempty"`
	// The set of Schema fields to return in the response. If not set, returns
	// Schemas with `name` and `type`, but not `definition`. Set to `FULL` to
	// retrieve all fields.
	View SchemaView `protobuf:"varint,2,opt,name=view,proto3,enum=mockgcp.pubsub.v1.SchemaView" json:"view,omitempty"`
	// Maximum number of schemas to return.
	PageSize int32 `protobuf:"varint,3,opt,name=page_size,json=pageSize,proto3" json:"page_size,omitempty"`
	// The value returned by the last `ListSchemasResponse`; indicates that
	// this is a continuation of a prior `ListSchemas` call, and that the
	// system should return the next page of data.
	PageToken string `protobuf:"bytes,4,opt,name=page_token,json=pageToken,proto3" json:"page_token,omitempty"`
	// contains filtered or unexported fields
}

type ListSchemasResponse struct {

	// The resulting schemas.
	Schemas []*Schema `protobuf:"bytes,1,rep,name=schemas,proto3" json:"schemas,omitempty"`
	// If not empty, indicates that there may be more schemas that match the
	// request; this value should be passed in a new `ListSchemasRequest`.
	NextPageToken string `protobuf:"bytes,2,opt,name=next_page_token,json=nextPageToken,proto3" json:"next_page_token,omitempty"`
	// contains filtered or unexported fields
}

type ListSnapshotsRequest struct {

	// Required. The name of the project in which to list snapshots.
	// Format is `projects/{project-id}`.
	Project string `protobuf:"bytes,1,opt,name=project,proto3" json:"project,omitempty"`
	// Optional. Maximum number of snapshots to return.
	PageSize int32 `protobuf:"varint,2,opt,name=page_size,json=pageSize,proto3" json:"page_size,omitempty"`
	// Optional. The value returned by the last `ListSnapshotsResponse`; indicates
	// that this is a continuation of a prior `ListSnapshots` call, and that the
	// system should return the next page of data.
	PageToken string `protobuf:"bytes,3,opt,name=page_token,json=pageToken,proto3" json:"page_token,omitempty"`
	// contains filtered or unexported fields
}

type ListSnapshotsResponse struct {

	// Optional. The resulting snapshots.
	Snapshots []*Snapshot `protobuf:"bytes,1,rep,name=snapshots,proto3" json:"snapshots,omitempty"`
	// Optional. If not empty, indicates that there may be more snapshot that
	// match the request; this value should be passed in a new
	// `ListSnapshotsRequest`.
	NextPageToken string `protobuf:"bytes,2,opt,name=next_page_token,json=nextPageToken,proto3" json:"next_page_token,omitempty"`
	// contains filtered or unexported fields
}

type ListSubscriptionsRequest struct {

	// Required. The name of the project in which to list subscriptions.
	// Format is `projects/{project-id}`.
	Project string `protobuf:"bytes,1,opt,name=project,proto3" json:"project,omitempty"`
	// Optional. Maximum number of subscriptions to return.
	PageSize int32 `protobuf:"varint,2,opt,name=page_size,json=pageSize,proto3" json:"page_size,omitempty"`
	// Optional. The value returned by the last `ListSubscriptionsResponse`;
	// indicates that this is a continuation of a prior `ListSubscriptions` call,
	// and that the system should return the next page of data.
	PageToken string `protobuf:"bytes,3,opt,name=page_token,json=pageToken,proto3" json:"page_token,omitempty"`
	// contains filtered or unexported fields
}

type ListSubscriptionsResponse struct {

	// Optional. The subscriptions that match the request.
	Subscriptions []*Subscription `protobuf:"bytes,1,rep,name=subscriptions,proto3" json:"subscriptions,omitempty"`
	// Optional. If not empty, indicates that there may be more subscriptions that
	// match the request; this value should be passed in a new
	// `ListSubscriptionsRequest` to get more subscriptions.
	NextPageToken string `protobuf:"bytes,2,opt,name=next_page_token,json=nextPageToken,proto3" json:"next_page_token,omitempty"`
	// contains filtered or unexported fields
}

type ListTopicSnapshotsRequest struct {

	// Required. The name of the topic that snapshots are attached to.
	// Format is `projects/{project}/topics/{topic}`.
	Topic string `protobuf:"bytes,1,opt,name=topic,proto3" json:"topic,omitempty"`
	// Optional. Maximum number of snapshot names to return.
	PageSize int32 `protobuf:"varint,2,opt,name=page_size,json=pageSize,proto3" json:"page_size,omitempty"`
	// Optional. The value returned by the last `ListTopicSnapshotsResponse`;
	// indicates that this is a continuation of a prior `ListTopicSnapshots` call,
	// and that the system should return the next page of data.
	PageToken string `protobuf:"bytes,3,opt,name=page_token,json=pageToken,proto3" json:"page_token,omitempty"`
	// contains filtered or unexported fields
}

type ListTopicSnapshotsResponse struct {

	// Optional. The names of the snapshots that match the request.
	Snapshots []string `protobuf:"bytes,1,rep,name=snapshots,proto3" json:"snapshots,omitempty"`
	// Optional. If not empty, indicates that there may be more snapshots that
	// match the request; this value should be passed in a new
	// `ListTopicSnapshotsRequest` to get more snapshots.
	NextPageToken string `protobuf:"bytes,2,opt,name=next_page_token,json=nextPageToken,proto3" json:"next_page_token,omitempty"`
	// contains filtered or unexported fields
}

type ListTopicSubscriptionsRequest struct {

	// Required. The name of the topic that subscriptions are attached to.
	// Format is `projects/{project}/topics/{topic}`.
	Topic string `protobuf:"bytes,1,opt,name=topic,proto3" json:"topic,omitempty"`
	// Optional. Maximum number of subscription names to return.
	PageSize int32 `protobuf:"varint,2,opt,name=page_size,json=pageSize,proto3" json:"page_size,omitempty"`
	// Optional. The value returned by the last `ListTopicSubscriptionsResponse`;
	// indicates that this is a continuation of a prior `ListTopicSubscriptions`
	// call, and that the system should return the next page of data.
	PageToken string `protobuf:"bytes,3,opt,name=page_token,json=pageToken,proto3" json:"page_token,omitempty"`
	// contains filtered or unexported fields
}

type ListTopicSubscriptionsResponse struct {

	// Optional. The names of subscriptions attached to the topic specified in the
	// request.
	Subscriptions []string `protobuf:"bytes,1,rep,name=subscriptions,proto3" json:"subscriptions,omitempty"`
	// Optional. If not empty, indicates that there may be more subscriptions that
	// match the request; this value should be passed in a new
	// `ListTopicSubscriptionsRequest` to get more subscriptions.
	NextPageToken string `protobuf:"bytes,2,opt,name=next_page_token,json=nextPageToken,proto3" json:"next_page_token,omitempty"`
	// contains filtered or unexported fields
}

type ListTopicsRequest struct {

	// Required. The name of the project in which to list topics.
	// Format is `projects/{project-id}`.
	Project string `protobuf:"bytes,1,opt,name=project,proto3" json:"project,omitempty"`
	// Optional. Maximum number of topics to return.
	PageSize int32 `protobuf:"varint,2,opt,name=page_size,json=pageSize,proto3" json:"page_size,omitempty"`
	// Optional. The value returned by the last `ListTopicsResponse`; indicates
	// that this is a continuation of a prior `ListTopics` call, and that the
	// system should return the next page of data.
	PageToken string `protobuf:"bytes,3,opt,name=page_token,json=pageToken,proto3" json:"page_token,omitempty"`
	// contains filtered or unexported fields
}

type ListTopicsResponse struct {

	// Optional. The resulting topics.
	Topics []*Topic `protobuf:"bytes,1,rep,name=topics,proto3" json:"topics,omitempty"`
	// Optional. If not empty, indicates that there may be more topics that match
	// the request; this value should be passed in a new `ListTopicsRequest`.
	NextPageToken string `protobuf:"bytes,2,opt,name=next_page_token,json=nextPageToken,proto3" json:"next_page_token,omitempty"`
	// contains filtered or unexported fields
}

type MessageStoragePolicy struct {

	// Optional. A list of IDs of Google Cloud regions where messages that are
	// published to the topic may be persisted in storage. Messages published by
	// publishers running in non-allowed Google Cloud regions (or running outside
	// of Google Cloud altogether) are routed for storage in one of the allowed
	// regions. An empty list means that no regions are allowed, and is not a
	// valid configuration.
	AllowedPersistenceRegions []string `` /* 138-byte string literal not displayed */
	// Optional. If true, `allowed_persistence_regions` is also used to enforce
	// in-transit guarantees for messages. That is, Pub/Sub will fail
	// Publish operations on this topic and subscribe operations
	// on any subscription attached to this topic in any region that is
	// not in `allowed_persistence_regions`.
	EnforceInTransit bool `protobuf:"varint,2,opt,name=enforce_in_transit,json=enforceInTransit,proto3" json:"enforce_in_transit,omitempty"`
	// contains filtered or unexported fields
}

type ModifyAckDeadlineRequest struct {

	// Required. The name of the subscription.
	// Format is `projects/{project}/subscriptions/{sub}`.
	Subscription string `protobuf:"bytes,1,opt,name=subscription,proto3" json:"subscription,omitempty"`
	// Required. List of acknowledgment IDs.
	AckIds []string `protobuf:"bytes,4,rep,name=ack_ids,json=ackIds,proto3" json:"ack_ids,omitempty"`
	// Required. The new ack deadline with respect to the time this request was
	// sent to the Pub/Sub system. For example, if the value is 10, the new ack
	// deadline will expire 10 seconds after the `ModifyAckDeadline` call was
	// made. Specifying zero might immediately make the message available for
	// delivery to another subscriber client. This typically results in an
	// increase in the rate of message redeliveries (that is, duplicates).
	// The minimum deadline you can specify is 0 seconds.
	// The maximum deadline you can specify in a single request is 600 seconds
	// (10 minutes).
	AckDeadlineSeconds int32 `protobuf:"varint,3,opt,name=ack_deadline_seconds,json=ackDeadlineSeconds,proto3" json:"ack_deadline_seconds,omitempty"`
	// contains filtered or unexported fields
}

type ModifyPushConfigRequest struct {

	// Required. The name of the subscription.
	// Format is `projects/{project}/subscriptions/{sub}`.
	Subscription string `protobuf:"bytes,1,opt,name=subscription,proto3" json:"subscription,omitempty"`
	// Required. The push configuration for future deliveries.
	//
	// An empty `pushConfig` indicates that the Pub/Sub system should
	// stop pushing messages from the given subscription and allow
	// messages to be pulled and acknowledged - effectively pausing
	// the subscription if `Pull` or `StreamingPull` is not called.
	PushConfig *PushConfig `protobuf:"bytes,2,opt,name=push_config,json=pushConfig,proto3" json:"push_config,omitempty"`
	// contains filtered or unexported fields
}

type PublishRequest struct {

	// Required. The messages in the request will be published on this topic.
	// Format is `projects/{project}/topics/{topic}`.
	Topic string `protobuf:"bytes,1,opt,name=topic,proto3" json:"topic,omitempty"`
	// Required. The messages to publish.
	Messages []*PubsubMessage `protobuf:"bytes,2,rep,name=messages,proto3" json:"messages,omitempty"`
	// contains filtered or unexported fields
}

type PublishResponse struct {

	// Optional. The server-assigned ID of each published message, in the same
	// order as the messages in the request. IDs are guaranteed to be unique
	// within the topic.
	MessageIds []string `protobuf:"bytes,1,rep,name=message_ids,json=messageIds,proto3" json:"message_ids,omitempty"`
	// contains filtered or unexported fields
}

type PublisherClient interface {
	// Creates the given topic with the given name. See the [resource name rules]
	// (https://cloud.google.com/pubsub/docs/pubsub-basics#resource_names).
	CreateTopic(ctx context.Context, in *Topic, opts ...grpc.CallOption) (*Topic, error)
	// Updates an existing topic by updating the fields specified in the update
	// mask. Note that certain properties of a topic are not modifiable.
	UpdateTopic(ctx context.Context, in *UpdateTopicRequest, opts ...grpc.CallOption) (*Topic, error)
	// Adds one or more messages to the topic. Returns `NOT_FOUND` if the topic
	// does not exist.
	Publish(ctx context.Context, in *PublishRequest, opts ...grpc.CallOption) (*PublishResponse, error)
	// Gets the configuration of a topic.
	GetTopic(ctx context.Context, in *GetTopicRequest, opts ...grpc.CallOption) (*Topic, error)
	// Lists matching topics.
	ListTopics(ctx context.Context, in *ListTopicsRequest, opts ...grpc.CallOption) (*ListTopicsResponse, error)
	// Lists the names of the attached subscriptions on this topic.
	ListTopicSubscriptions(ctx context.Context, in *ListTopicSubscriptionsRequest, opts ...grpc.CallOption) (*ListTopicSubscriptionsResponse, error)
	// Lists the names of the snapshots on this topic. Snapshots are used in
	// [Seek](https://cloud.google.com/pubsub/docs/replay-overview) operations,
	// which allow you to manage message acknowledgments in bulk. That is, you can
	// set the acknowledgment state of messages in an existing subscription to the
	// state captured by a snapshot.
	ListTopicSnapshots(ctx context.Context, in *ListTopicSnapshotsRequest, opts ...grpc.CallOption) (*ListTopicSnapshotsResponse, error)
	// Deletes the topic with the given name. Returns `NOT_FOUND` if the topic
	// does not exist. After a topic is deleted, a new topic may be created with
	// the same name; this is an entirely new topic with none of the old
	// configuration or subscriptions. Existing subscriptions to this topic are
	// not deleted, but their `topic` field is set to `_deleted-topic_`.
	DeleteTopic(ctx context.Context, in *DeleteTopicRequest, opts ...grpc.CallOption) (*empty.Empty, error)
	// Detaches a subscription from this topic. All messages retained in the
	// subscription are dropped. Subsequent `Pull` and `StreamingPull` requests
	// will return FAILED_PRECONDITION. If the subscription is a push
	// subscription, pushes to the endpoint will stop.
	DetachSubscription(ctx context.Context, in *DetachSubscriptionRequest, opts ...grpc.CallOption) (*DetachSubscriptionResponse, error)
}

type PublisherServer interface {
	// Creates the given topic with the given name. See the [resource name rules]
	// (https://cloud.google.com/pubsub/docs/pubsub-basics#resource_names).
	CreateTopic(context.Context, *Topic) (*Topic, error)
	// Updates an existing topic by updating the fields specified in the update
	// mask. Note that certain properties of a topic are not modifiable.
	UpdateTopic(context.Context, *UpdateTopicRequest) (*Topic, error)
	// Adds one or more messages to the topic. Returns `NOT_FOUND` if the topic
	// does not exist.
	Publish(context.Context, *PublishRequest) (*PublishResponse, error)
	// Gets the configuration of a topic.
	GetTopic(context.Context, *GetTopicRequest) (*Topic, error)
	// Lists matching topics.
	ListTopics(context.Context, *ListTopicsRequest) (*ListTopicsResponse, error)
	// Lists the names of the attached subscriptions on this topic.
	ListTopicSubscriptions(context.Context, *ListTopicSubscriptionsRequest) (*ListTopicSubscriptionsResponse, error)
	// Lists the names of the snapshots on this topic. Snapshots are used in
	// [Seek](https://cloud.google.com/pubsub/docs/replay-overview) operations,
	// which allow you to manage message acknowledgments in bulk. That is, you can
	// set the acknowledgment state of messages in an existing subscription to the
	// state captured by a snapshot.
	ListTopicSnapshots(context.Context, *ListTopicSnapshotsRequest) (*ListTopicSnapshotsResponse, error)
	// Deletes the topic with the given name. Returns `NOT_FOUND` if the topic
	// does not exist. After a topic is deleted, a new topic may be created with
	// the same name; this is an entirely new topic with none of the old
	// configuration or subscriptions. Existing subscriptions to this topic are
	// not deleted, but their `topic` field is set to `_deleted-topic_`.
	DeleteTopic(context.Context, *DeleteTopicRequest) (*empty.Empty, error)
	// Detaches a subscription from this topic. All messages retained in the
	// subscription are dropped. Subsequent `Pull` and `StreamingPull` requests
	// will return FAILED_PRECONDITION. If the subscription is a push
	// subscription, pushes to the endpoint will stop.
	DetachSubscription(context.Context, *DetachSubscriptionRequest) (*DetachSubscriptionResponse, error)
	// contains filtered or unexported methods
}

type PubsubMessage struct {

	// Optional. The message data field. If this field is empty, the message must
	// contain at least one attribute.
	Data []byte `protobuf:"bytes,1,opt,name=data,proto3" json:"data,omitempty"`
	// Optional. Attributes for this message. If this field is empty, the message
	// must contain non-empty data. This can be used to filter messages on the
	// subscription.
	Attributes map[string]string `` /* 161-byte string literal not displayed */
	// ID of this message, assigned by the server when the message is published.
	// Guaranteed to be unique within the topic. This value may be read by a
	// subscriber that receives a `PubsubMessage` via a `Pull` call or a push
	// delivery. It must not be populated by the publisher in a `Publish` call.
	MessageId string `protobuf:"bytes,3,opt,name=message_id,json=messageId,proto3" json:"message_id,omitempty"`
	// The time at which the message was published, populated by the server when
	// it receives the `Publish` call. It must not be populated by the
	// publisher in a `Publish` call.
	PublishTime *timestamp.Timestamp `protobuf:"bytes,4,opt,name=publish_time,json=publishTime,proto3" json:"publish_time,omitempty"`
	// Optional. If non-empty, identifies related messages for which publish order
	// should be respected. If a `Subscription` has `enable_message_ordering` set
	// to `true`, messages published with the same non-empty `ordering_key` value
	// will be delivered to subscribers in the order in which they are received by
	// the Pub/Sub system. All `PubsubMessage`s published in a given
	// `PublishRequest` must specify the same `ordering_key` value. For more
	// information, see [ordering
	// messages](https://cloud.google.com/pubsub/docs/ordering).
	OrderingKey string `protobuf:"bytes,5,opt,name=ordering_key,json=orderingKey,proto3" json:"ordering_key,omitempty"`
	// contains filtered or unexported fields
}

type PullRequest struct {

	// Required. The subscription from which messages should be pulled.
	// Format is `projects/{project}/subscriptions/{sub}`.
	Subscription string `protobuf:"bytes,1,opt,name=subscription,proto3" json:"subscription,omitempty"`
	// Optional. If this field set to true, the system will respond immediately
	// even if it there are no messages available to return in the `Pull`
	// response. Otherwise, the system may wait (for a bounded amount of time)
	// until at least one message is available, rather than returning no messages.
	// Warning: setting this field to `true` is discouraged because it adversely
	// impacts the performance of `Pull` operations. We recommend that users do
	// not set this field.
	//
	// Deprecated: Do not use.
	ReturnImmediately bool `protobuf:"varint,2,opt,name=return_immediately,json=returnImmediately,proto3" json:"return_immediately,omitempty"`
	// Required. The maximum number of messages to return for this request. Must
	// be a positive integer. The Pub/Sub system may return fewer than the number
	// specified.
	MaxMessages int32 `protobuf:"varint,3,opt,name=max_messages,json=maxMessages,proto3" json:"max_messages,omitempty"`
	// contains filtered or unexported fields
}

type PullResponse struct {

	// Optional. Received Pub/Sub messages. The list will be empty if there are no
	// more messages available in the backlog, or if no messages could be returned
	// before the request timeout. For JSON, the response can be entirely
	// empty. The Pub/Sub system may return fewer than the `maxMessages` requested
	// even if there are more messages available in the backlog.
	ReceivedMessages []*ReceivedMessage `protobuf:"bytes,1,rep,name=received_messages,json=receivedMessages,proto3" json:"received_messages,omitempty"`
	// contains filtered or unexported fields
}

type PushConfig struct {

	// Optional. A URL locating the endpoint to which messages should be pushed.
	// For example, a Webhook endpoint might use `https://example.com/push`.
	PushEndpoint string `protobuf:"bytes,1,opt,name=push_endpoint,json=pushEndpoint,proto3" json:"push_endpoint,omitempty"`
	// Optional. Endpoint configuration attributes that can be used to control
	// different aspects of the message delivery.
	//
	// The only currently supported attribute is `x-goog-version`, which you can
	// use to change the format of the pushed message. This attribute
	// indicates the version of the data expected by the endpoint. This
	// controls the shape of the pushed message (i.e., its fields and metadata).
	//
	// If not present during the `CreateSubscription` call, it will default to
	// the version of the Pub/Sub API used to make such call. If not present in a
	// `ModifyPushConfig` call, its value will not be changed. `GetSubscription`
	// calls will always return a valid version, even if the subscription was
	// created without this attribute.
	//
	// The only supported values for the `x-goog-version` attribute are:
	//
	// * `v1beta1`: uses the push format defined in the v1beta1 Pub/Sub API.
	// * `v1` or `v1beta2`: uses the push format defined in the v1 Pub/Sub API.
	//
	// For example:
	// `attributes { "x-goog-version": "v1" }`
	Attributes map[string]string `` /* 161-byte string literal not displayed */
	// An authentication method used by push endpoints to verify the source of
	// push requests. This can be used with push endpoints that are private by
	// default to allow requests only from the Pub/Sub system, for example.
	// This field is optional and should be set only by users interested in
	// authenticated push.
	//
	// Types that are assignable to AuthenticationMethod:
	//
	//	*PushConfig_OidcToken_
	AuthenticationMethod isPushConfig_AuthenticationMethod `protobuf_oneof:"authentication_method"`
	// The format of the delivered message to the push endpoint is defined by
	// the chosen wrapper. When unset, `PubsubWrapper` is used.
	//
	// Types that are assignable to Wrapper:
	//
	//	*PushConfig_PubsubWrapper_
	//	*PushConfig_NoWrapper_
	Wrapper isPushConfig_Wrapper `protobuf_oneof:"wrapper"`
	// contains filtered or unexported fields
}

type PushConfig_NoWrapper struct {

	// Optional. When true, writes the Pub/Sub message metadata to
	// `x-goog-pubsub-<KEY>:<VAL>` headers of the HTTP request. Writes the
	// Pub/Sub message attributes to `<KEY>:<VAL>` headers of the HTTP request.
	WriteMetadata bool `protobuf:"varint,1,opt,name=write_metadata,json=writeMetadata,proto3" json:"write_metadata,omitempty"`
	// contains filtered or unexported fields
}

type PushConfig_NoWrapper_ struct {
	// Optional. When set, the payload to the push endpoint is not wrapped.
	NoWrapper *PushConfig_NoWrapper `protobuf:"bytes,5,opt,name=no_wrapper,json=noWrapper,proto3,oneof"`
}

type PushConfig_OidcToken struct {

	// Optional. [Service account
	// email](https://cloud.google.com/iam/docs/service-accounts)
	// used for generating the OIDC token. For more information
	// on setting up authentication, see
	// [Push subscriptions](https://cloud.google.com/pubsub/docs/push).
	ServiceAccountEmail string `protobuf:"bytes,1,opt,name=service_account_email,json=serviceAccountEmail,proto3" json:"service_account_email,omitempty"`
	// Optional. Audience to be used when generating OIDC token. The audience
	// claim identifies the recipients that the JWT is intended for. The
	// audience value is a single case-sensitive string. Having multiple values
	// (array) for the audience field is not supported. More info about the OIDC
	// JWT token audience here:
	// https://tools.ietf.org/html/rfc7519#section-4.1.3 Note: if not specified,
	// the Push endpoint URL will be used.
	Audience string `protobuf:"bytes,2,opt,name=audience,proto3" json:"audience,omitempty"`
	// contains filtered or unexported fields
}

type PushConfig_OidcToken_ struct {
	// Optional. If specified, Pub/Sub will generate and attach an OIDC JWT
	// token as an `Authorization` header in the HTTP request for every pushed
	// message.
	OidcToken *PushConfig_OidcToken `protobuf:"bytes,3,opt,name=oidc_token,json=oidcToken,proto3,oneof"`
}

type PushConfig_PubsubWrapper struct {
	// contains filtered or unexported fields
}

type PushConfig_PubsubWrapper_ struct {
	// Optional. When set, the payload to the push endpoint is in the form of
	// the JSON representation of a PubsubMessage
	// (https://cloud.google.com/pubsub/docs/reference/rpc/mockgcp.pubsub.v1#pubsubmessage).
	PubsubWrapper *PushConfig_PubsubWrapper `protobuf:"bytes,4,opt,name=pubsub_wrapper,json=pubsubWrapper,proto3,oneof"`
}

type ReceivedMessage struct {

	// Optional. This ID can be used to acknowledge the received message.
	AckId string `protobuf:"bytes,1,opt,name=ack_id,json=ackId,proto3" json:"ack_id,omitempty"`
	// Optional. The message.
	Message *PubsubMessage `protobuf:"bytes,2,opt,name=message,proto3" json:"message,omitempty"`
	// Optional. The approximate number of times that Pub/Sub has attempted to
	// deliver the associated message to a subscriber.
	//
	// More precisely, this is 1 + (number of NACKs) +
	// (number of ack_deadline exceeds) for this message.
	//
	// A NACK is any call to ModifyAckDeadline with a 0 deadline. An ack_deadline
	// exceeds event is whenever a message is not acknowledged within
	// ack_deadline. Note that ack_deadline is initially
	// Subscription.ackDeadlineSeconds, but may get extended automatically by
	// the client library.
	//
	// Upon the first delivery of a given message, `delivery_attempt` will have a
	// value of 1. The value is calculated at best effort and is approximate.
	//
	// If a DeadLetterPolicy is not set on the subscription, this will be 0.
	DeliveryAttempt int32 `protobuf:"varint,3,opt,name=delivery_attempt,json=deliveryAttempt,proto3" json:"delivery_attempt,omitempty"`
	// contains filtered or unexported fields
}