flags

var (
	BuildEnvFlag = cli.StringFlag{
		Name: "build-env",
		Usage: "Build environment for which the binary is produced, " +
			"e.g. production or development",
		Required: true,
		EnvVar:   "BUILD_ENV",
	}
	EthNetworkNameFlag = cli.StringFlag{
		Name:     "eth-network-name",
		Usage:    "Ethereum network name",
		Required: true,
		EnvVar:   "ETH_NETWORK_NAME",
	}
	L1EthRpcFlag = cli.StringFlag{
		Name:     "l1-eth-rpc",
		Usage:    "HTTP provider URL for L1",
		Required: true,
		EnvVar:   "L1_ETH_RPC",
	}
	L2EthRpcFlag = cli.StringFlag{
		Name:     "l2-eth-rpc",
		Usage:    "HTTP provider URL for L2",
		Required: true,
		EnvVar:   "L2_ETH_RPC",
	}
	CTCAddressFlag = cli.StringFlag{
		Name:     "ctc-address",
		Usage:    "Address of the CTC contract",
		Required: true,
		EnvVar:   "CTC_ADDRESS",
	}
	SCCAddressFlag = cli.StringFlag{
		Name:     "scc-address",
		Usage:    "Address of the SCC contract",
		Required: true,
		EnvVar:   "SCC_ADDRESS",
	}
	MinL1TxSizeFlag = cli.Uint64Flag{
		Name: "min-l1-tx-size",
		Usage: "Minimum size in bytes of any L1 transaction that gets " +
			"generated by the batch submitter",
		Required: true,
		EnvVar:   prefixEnvVar("MIN_L1_TX_SIZE"),
	}
	MaxL1TxSizeFlag = cli.Uint64Flag{
		Name: "max-l1-tx-size",
		Usage: "Maximum size in bytes of any L1 transaction that gets " +
			"generated by the batch submitter",
		Required: true,
		EnvVar:   prefixEnvVar("MAX_L1_TX_SIZE"),
	}
	MaxPlaintextBatchSizeFlag = cli.Uint64Flag{
		Name: "max-plaintext-batch-size",
		Usage: "Maximum size in bytes of of the plaintext tx data " +
			"encoded in batches",
		Required: true,
		EnvVar:   prefixEnvVar("MAX_PLAINTEXT_BATCH_SIZE"),
	}
	MinStateRootElementsFlag = cli.Uint64Flag{
		Name: "min-state-root-elements",
		Usage: "Minimum number of elements required to submit a state " +
			"root batch",
		Required: true,
		EnvVar:   prefixEnvVar("MIN_STATE_ROOT_ELEMENTS"),
	}
	MaxStateRootElementsFlag = cli.Uint64Flag{
		Name: "max-state-root-elements",
		Usage: "Maximum number of elements required to submit a state " +
			"root batch",
		Required: true,
		EnvVar:   prefixEnvVar("MAX_STATE_ROOT_ELEMENTS"),
	}
	MaxBatchSubmissionTimeFlag = cli.DurationFlag{
		Name: "max-batch-submission-time",
		Usage: "Maximum amount of time that we will wait before " +
			"submitting an under-sized batch",
		Required: true,
		EnvVar:   prefixEnvVar("MAX_BATCH_SUBMISSION_TIME"),
	}
	PollIntervalFlag = cli.DurationFlag{
		Name: "poll-interval",
		Usage: "Delay between querying L2 for more transactions and " +
			"creating a new batch",
		Required: true,
		EnvVar:   prefixEnvVar("POLL_INTERVAL"),
	}
	NumConfirmationsFlag = cli.Uint64Flag{
		Name: "num-confirmations",
		Usage: "Number of confirmations which we will wait after " +
			"appending a new batch",
		Required: true,
		EnvVar:   prefixEnvVar("NUM_CONFIRMATIONS"),
	}
	SafeAbortNonceTooLowCountFlag = cli.Uint64Flag{
		Name: "safe-abort-nonce-too-low-count",
		Usage: "Number of ErrNonceTooLow observations required to " +
			"give up on a tx at a particular nonce without receiving " +
			"confirmation",
		Required: true,
		EnvVar:   prefixEnvVar("SAFE_ABORT_NONCE_TOO_LOW_COUNT"),
	}
	ResubmissionTimeoutFlag = cli.DurationFlag{
		Name: "resubmission-timeout",
		Usage: "Duration we will wait before resubmitting a " +
			"transaction to L1",
		Required: true,
		EnvVar:   prefixEnvVar("RESUBMISSION_TIMEOUT"),
	}
	FinalityConfirmationsFlag = cli.Uint64Flag{
		Name: "finality-confirmations",
		Usage: "Number of confirmations that we should wait before " +
			"submitting state roots for CTC elements",
		Required: true,
		EnvVar:   prefixEnvVar("FINALITY_CONFIRMATIONS"),
	}
	RunTxBatchSubmitterFlag = cli.BoolFlag{
		Name:     "run-tx-batch-submitter",
		Usage:    "Determines whether or not to run the tx batch submitter",
		Required: true,
		EnvVar:   prefixEnvVar("RUN_TX_BATCH_SUBMITTER"),
	}
	RunStateBatchSubmitterFlag = cli.BoolFlag{
		Name:     "run-state-batch-submitter",
		Usage:    "Determines whether or not to run the state batch submitter",
		Required: true,
		EnvVar:   prefixEnvVar("RUN_STATE_BATCH_SUBMITTER"),
	}
	SafeMinimumEtherBalanceFlag = cli.Uint64Flag{
		Name: "safe-minimum-ether-balance",
		Usage: "Safe minimum amount of ether the batch submitter key " +
			"should hold before it starts to log errors",
		Required: true,
		EnvVar:   prefixEnvVar("SAFE_MINIMUM_ETHER_BALANCE"),
	}
	ClearPendingTxsFlag = cli.BoolFlag{
		Name: "clear-pending-txs",
		Usage: "Whether or not to clear pending transaction in the " +
			"mempool on startup",
		Required: true,
		EnvVar:   prefixEnvVar("CLEAR_PENDING_TXS"),
	}

	LogLevelFlag = cli.StringFlag{
		Name:   "log-level",
		Usage:  "The lowest log level that will be output",
		Value:  "info",
		EnvVar: prefixEnvVar("LOG_LEVEL"),
	}
	LogTerminalFlag = cli.BoolFlag{
		Name: "log-terminal",
		Usage: "If true, outputs logs in terminal format, otherwise prints " +
			"in JSON format. If SENTRY_ENABLE is set to true, this flag is " +
			"ignored and logs are printed using JSON",
		EnvVar: prefixEnvVar("LOG_TERMINAL"),
	}
	SentryEnableFlag = cli.BoolFlag{
		Name:   "sentry-enable",
		Usage:  "Whether or not to enable Sentry. If true, sentry-dsn must also be set",
		EnvVar: prefixEnvVar("SENTRY_ENABLE"),
	}
	SentryDsnFlag = cli.StringFlag{
		Name:   "sentry-dsn",
		Usage:  "Sentry data source name",
		EnvVar: prefixEnvVar("SENTRY_DSN"),
	}
	SentryTraceRateFlag = cli.DurationFlag{
		Name:   "sentry-trace-rate",
		Usage:  "Sentry trace rate",
		Value:  50 * time.Millisecond,
		EnvVar: prefixEnvVar("SENTRY_TRACE_RATE"),
	}
	BlockOffsetFlag = cli.Uint64Flag{
		Name:   "block-offset",
		Usage:  "The offset between the CTC contract start and the L2 geth blocks",
		Value:  1,
		EnvVar: prefixEnvVar("BLOCK_OFFSET"),
	}
	SequencerPrivateKeyFlag = cli.StringFlag{
		Name:   "sequencer-private-key",
		Usage:  "The private key to use for sending to the sequencer contract",
		EnvVar: prefixEnvVar("SEQUENCER_PRIVATE_KEY"),
	}
	ProposerPrivateKeyFlag = cli.StringFlag{
		Name:   "proposer-private-key",
		Usage:  "The private key to use for sending to the proposer contract",
		EnvVar: prefixEnvVar("PROPOSER_PRIVATE_KEY"),
	}
	MnemonicFlag = cli.StringFlag{
		Name: "mnemonic",
		Usage: "The mnemonic used to derive the wallets for either the " +
			"sequencer or the proposer",
		EnvVar: prefixEnvVar("MNEMONIC"),
	}
	SequencerHDPathFlag = cli.StringFlag{
		Name: "sequencer-hd-path",
		Usage: "The HD path used to derive the sequencer wallet from the " +
			"mnemonic. The mnemonic flag must also be set.",
		EnvVar: prefixEnvVar("SEQUENCER_HD_PATH"),
	}
	ProposerHDPathFlag = cli.StringFlag{
		Name: "proposer-hd-path",
		Usage: "The HD path used to derive the proposer wallet from the " +
			"mnemonic. The mnemonic flag must also be set.",
		EnvVar: prefixEnvVar("PROPOSER_HD_PATH"),
	}
	SequencerBatchType = cli.StringFlag{
		Name:   "sequencer-batch-type",
		Usage:  "The type of sequencer batch to be submitted. Valid arguments are legacy or zlib.",
		Value:  "legacy",
		EnvVar: prefixEnvVar("SEQUENCER_BATCH_TYPE"),
	}
	MetricsServerEnableFlag = cli.BoolFlag{
		Name:   "metrics-server-enable",
		Usage:  "Whether or not to run the embedded metrics server",
		EnvVar: prefixEnvVar("METRICS_SERVER_ENABLE"),
	}
	MetricsHostnameFlag = cli.StringFlag{
		Name:   "metrics-hostname",
		Usage:  "The hostname of the metrics server",
		Value:  "127.0.0.1",
		EnvVar: prefixEnvVar("METRICS_HOSTNAME"),
	}
	MetricsPortFlag = cli.Uint64Flag{
		Name:   "metrics-port",
		Usage:  "The port of the metrics server",
		Value:  7300,
		EnvVar: prefixEnvVar("METRICS_PORT"),
	}
	HTTP2DisableFlag = cli.BoolFlag{
		Name:   "http2-disable",
		Usage:  "Whether or not to disable HTTP/2 support.",
		EnvVar: prefixEnvVar("HTTP2_DISABLE"),
	}
)

var Flags = append(requiredFlags, optionalFlags...)