iclusterlog

type ClusterLogClient interface {

	// IUnknown retrieval method.
	Unknown() iunknown.UnknownClient

	// The GenerateClusterLog method writes a file that contains diagnostic information
	// about failover clusters for the server on which it executes. The content and format
	// of the file are implementation-specific, but SHOULD contain diagnostic information.
	//
	// Return Values: A signed 32-bit value that indicates return status. If the method
	// returns a negative value, it has failed. Zero or positive values indicate success,
	// with the lower 16 bits in positive nonzero values containing warnings or flags defined
	// in the method implementation. For more information about Win32 error codes and HRESULT
	// values, see [MS-ERREF] sections 2.2 and 2.1.
	//
	//	+-------------------+--------------------------+
	//	|      RETURN       |                          |
	//	|    VALUE/CODE     |       DESCRIPTION        |
	//	|                   |                          |
	//	+-------------------+--------------------------+
	//	+-------------------+--------------------------+
	//	| 0x00000000 S_OK   | The call was successful. |
	//	+-------------------+--------------------------+
	//
	// Exceptions Thrown: No exceptions are thrown beyond those thrown by the underlying
	// RPC protocol [MS-RPCE].
	//
	// The opnum field value for this method is 3.
	GenerateClusterLog(context.Context, *GenerateClusterLogRequest, ...dcerpc.CallOption) (*GenerateClusterLogResponse, error)

	// The GenerateTimeSpanLog method writes a file that contains diagnostic information
	// about failover clusters for the server on which it executes. The log entries in the
	// file date back only for the specified number of minutes. The content and format of
	// the file is implementation-specific, but SHOULD contain diagnostic information.
	//
	// Return Values: Return values are the same as the return values for the GenerateClusterLog
	// method specified in section 3.12.4.1.
	//
	//	+-------------------+--------------------------+
	//	|      RETURN       |                          |
	//	|    VALUE/CODE     |       DESCRIPTION        |
	//	|                   |                          |
	//	+-------------------+--------------------------+
	//	+-------------------+--------------------------+
	//	| 0x00000000 S_OK   | The call was successful. |
	//	+-------------------+--------------------------+
	//
	// Exceptions Thrown: No exceptions are thrown beyond those thrown by the underlying
	// RPC protocol [MS-RPCE].
	//
	// The opnum field value for this method is 4.
	GenerateTimeSpanLog(context.Context, *GenerateTimeSpanLogRequest, ...dcerpc.CallOption) (*GenerateTimeSpanLogResponse, error)

	// The GenerateClusterLogInLocalTime method<41> writes a file that contains diagnostic
	// information about failover clusters for the server on which it executes. The file
	// uses local time instead of GMT. The content and format of the file are implementation-specific
	// but SHOULD contain diagnostic information.
	//
	// Return Values: A signed 32-bit value that indicates return status. If the method
	// returns a negative value, it has failed. Zero or positive values indicate success,
	// with the lower 16 bits in positive nonzero values containing warnings or flags defined
	// in the method implementation. For more information about Win32 error codes and HRESULT
	// values, see [MS-ERREF] sections 2.2 and 2.1.
	//
	//	+-------------------+--------------------------+
	//	|      RETURN       |                          |
	//	|    VALUE/CODE     |       DESCRIPTION        |
	//	|                   |                          |
	//	+-------------------+--------------------------+
	//	+-------------------+--------------------------+
	//	| 0x00000000 S_OK   | The call was successful. |
	//	+-------------------+--------------------------+
	//
	// Exceptions Thrown: No exceptions are thrown beyond those thrown by the underlying
	// RPC protocol [MS-RPCE].
	//
	// The opnum field value for this method is 5.
	GenerateClusterLogInLocalTime(context.Context, *GenerateClusterLogInLocalTimeRequest, ...dcerpc.CallOption) (*GenerateClusterLogInLocalTimeResponse, error)

	// The GenerateTimeSpanLogInLocalTime method<42> writes a file that contains diagnostic
	// information about failover clusters for the server on which it executes. The log
	// entries in the file date back only for the specified number of minutes. The file
	// uses local time instead of GMT. The content and format of the file is implementation-specific
	// but SHOULD contain diagnostic information.
	//
	// Return Values: Return values are the same as the return values for the GenerateClusterLog
	// method specified in section 3.12.4.1.
	//
	//	+-------------------+--------------------------+
	//	|      RETURN       |                          |
	//	|    VALUE/CODE     |       DESCRIPTION        |
	//	|                   |                          |
	//	+-------------------+--------------------------+
	//	+-------------------+--------------------------+
	//	| 0x00000000 S_OK   | The call was successful. |
	//	+-------------------+--------------------------+
	//
	// Exceptions Thrown: No exceptions are thrown beyond those thrown by the underlying
	// RPC protocol [MS-RPCE].
	//
	// The opnum field value for this method is 6.
	GenerateTimeSpanLogInLocalTime(context.Context, *GenerateTimeSpanLogInLocalTimeRequest, ...dcerpc.CallOption) (*GenerateTimeSpanLogInLocalTimeResponse, error)

	// AlterContext alters the client context.
	AlterContext(context.Context, ...dcerpc.Option) error

	// IPID sets the object interface identifier.
	IPID(context.Context, *dcom.IPID) ClusterLogClient
}

type ClusterLogServer interface {

	// IUnknown base class.
	iunknown.UnknownServer

	// The GenerateClusterLog method writes a file that contains diagnostic information
	// about failover clusters for the server on which it executes. The content and format
	// of the file are implementation-specific, but SHOULD contain diagnostic information.
	//
	// Return Values: A signed 32-bit value that indicates return status. If the method
	// returns a negative value, it has failed. Zero or positive values indicate success,
	// with the lower 16 bits in positive nonzero values containing warnings or flags defined
	// in the method implementation. For more information about Win32 error codes and HRESULT
	// values, see [MS-ERREF] sections 2.2 and 2.1.
	//
	//	+-------------------+--------------------------+
	//	|      RETURN       |                          |
	//	|    VALUE/CODE     |       DESCRIPTION        |
	//	|                   |                          |
	//	+-------------------+--------------------------+
	//	+-------------------+--------------------------+
	//	| 0x00000000 S_OK   | The call was successful. |
	//	+-------------------+--------------------------+
	//
	// Exceptions Thrown: No exceptions are thrown beyond those thrown by the underlying
	// RPC protocol [MS-RPCE].
	//
	// The opnum field value for this method is 3.
	GenerateClusterLog(context.Context, *GenerateClusterLogRequest) (*GenerateClusterLogResponse, error)

	// The GenerateTimeSpanLog method writes a file that contains diagnostic information
	// about failover clusters for the server on which it executes. The log entries in the
	// file date back only for the specified number of minutes. The content and format of
	// the file is implementation-specific, but SHOULD contain diagnostic information.
	//
	// Return Values: Return values are the same as the return values for the GenerateClusterLog
	// method specified in section 3.12.4.1.
	//
	//	+-------------------+--------------------------+
	//	|      RETURN       |                          |
	//	|    VALUE/CODE     |       DESCRIPTION        |
	//	|                   |                          |
	//	+-------------------+--------------------------+
	//	+-------------------+--------------------------+
	//	| 0x00000000 S_OK   | The call was successful. |
	//	+-------------------+--------------------------+
	//
	// Exceptions Thrown: No exceptions are thrown beyond those thrown by the underlying
	// RPC protocol [MS-RPCE].
	//
	// The opnum field value for this method is 4.
	GenerateTimeSpanLog(context.Context, *GenerateTimeSpanLogRequest) (*GenerateTimeSpanLogResponse, error)

	// The GenerateClusterLogInLocalTime method<41> writes a file that contains diagnostic
	// information about failover clusters for the server on which it executes. The file
	// uses local time instead of GMT. The content and format of the file are implementation-specific
	// but SHOULD contain diagnostic information.
	//
	// Return Values: A signed 32-bit value that indicates return status. If the method
	// returns a negative value, it has failed. Zero or positive values indicate success,
	// with the lower 16 bits in positive nonzero values containing warnings or flags defined
	// in the method implementation. For more information about Win32 error codes and HRESULT
	// values, see [MS-ERREF] sections 2.2 and 2.1.
	//
	//	+-------------------+--------------------------+
	//	|      RETURN       |                          |
	//	|    VALUE/CODE     |       DESCRIPTION        |
	//	|                   |                          |
	//	+-------------------+--------------------------+
	//	+-------------------+--------------------------+
	//	| 0x00000000 S_OK   | The call was successful. |
	//	+-------------------+--------------------------+
	//
	// Exceptions Thrown: No exceptions are thrown beyond those thrown by the underlying
	// RPC protocol [MS-RPCE].
	//
	// The opnum field value for this method is 5.
	GenerateClusterLogInLocalTime(context.Context, *GenerateClusterLogInLocalTimeRequest) (*GenerateClusterLogInLocalTimeResponse, error)

	// The GenerateTimeSpanLogInLocalTime method<42> writes a file that contains diagnostic
	// information about failover clusters for the server on which it executes. The log
	// entries in the file date back only for the specified number of minutes. The file
	// uses local time instead of GMT. The content and format of the file is implementation-specific
	// but SHOULD contain diagnostic information.
	//
	// Return Values: Return values are the same as the return values for the GenerateClusterLog
	// method specified in section 3.12.4.1.
	//
	//	+-------------------+--------------------------+
	//	|      RETURN       |                          |
	//	|    VALUE/CODE     |       DESCRIPTION        |
	//	|                   |                          |
	//	+-------------------+--------------------------+
	//	+-------------------+--------------------------+
	//	| 0x00000000 S_OK   | The call was successful. |
	//	+-------------------+--------------------------+
	//
	// Exceptions Thrown: No exceptions are thrown beyond those thrown by the underlying
	// RPC protocol [MS-RPCE].
	//
	// The opnum field value for this method is 6.
	GenerateTimeSpanLogInLocalTime(context.Context, *GenerateTimeSpanLogInLocalTimeRequest) (*GenerateTimeSpanLogInLocalTimeResponse, error)
}

type GenerateClusterLogInLocalTimeRequest struct {
	// This: ORPCTHIS structure that is used to send ORPC extension data to the server.
	This *dcom.ORPCThis `idl:"name:This" json:"this"`
}

type GenerateClusterLogInLocalTimeResponse struct {
	// That: ORPCTHAT structure that is used to return ORPC extension data to the client.
	That *dcom.ORPCThat `idl:"name:That" json:"that"`
	// LogFilePath: Upon successful completion of this method, the server MUST set this
	// parameter to the location where the server has exposed a file containing the diagnostic
	// log data. The path is relative to the machine and starts with a share name. The format
	// is "<share>\<filename>" where <share> is a share name and <filename> is the name
	// of the file or device. The LogFilePath parameter MUST form a valid UncPath if \\<servername>\
	// is prepended to its contents. On unsuccessful completion of this method, the client
	// MUST ignore this value.
	LogFilePath *oaut.String `idl:"name:LogFilePath" json:"log_file_path"`
	// Return: The GenerateClusterLogInLocalTime return value.
	Return int32 `idl:"name:Return" json:"return"`
}

type GenerateClusterLogRequest struct {
	// This: ORPCTHIS structure that is used to send ORPC extension data to the server.
	This *dcom.ORPCThis `idl:"name:This" json:"this"`
}

type GenerateClusterLogResponse struct {
	// That: ORPCTHAT structure that is used to return ORPC extension data to the client.
	That *dcom.ORPCThat `idl:"name:That" json:"that"`
	// LogFilePath: Upon successful completion of this method, the server MUST set this
	// parameter to the location where the server has exposed a file containing the diagnostic
	// log data. The path is relative to the machine and starts with a share name. The format
	// is "<share>\<filename>" where <share> is a share name, and <filename> is the name
	// of the file or device. The LogFilePath parameter MUST form a valid UncPath if "\\<servername>\"
	// is prepended to its contents. On unsuccessful completion of this method, the client
	// MUST ignore this value.
	LogFilePath *oaut.String `idl:"name:LogFilePath" json:"log_file_path"`
	// Return: The GenerateClusterLog return value.
	Return int32 `idl:"name:Return" json:"return"`
}

type GenerateTimeSpanLogInLocalTimeRequest struct {
	// This: ORPCTHIS structure that is used to send ORPC extension data to the server.
	This *dcom.ORPCThis `idl:"name:This" json:"this"`
	// SpanMinutes: A value, in minutes, that indicates those values that SHOULD be in the
	// log. Events that occurred in the range of Now to (Now - SpanMinutes) MUST be in the
	// log and no others. Now is the local time on the server.
	SpanMinutes uint32 `idl:"name:SpanMinutes" json:"span_minutes"`
}

type GenerateTimeSpanLogInLocalTimeResponse struct {
	// That: ORPCTHAT structure that is used to return ORPC extension data to the client.
	That *dcom.ORPCThat `idl:"name:That" json:"that"`
	// LogFilePath: Has the same meaning as parameter LogFilePath for the GenerateClusterLog
	// method specified in section 3.12.4.1.
	LogFilePath *oaut.String `idl:"name:LogFilePath" json:"log_file_path"`
	// Return: The GenerateTimeSpanLogInLocalTime return value.
	Return int32 `idl:"name:Return" json:"return"`
}

type GenerateTimeSpanLogRequest struct {
	// This: ORPCTHIS structure that is used to send ORPC extension data to the server.
	This *dcom.ORPCThis `idl:"name:This" json:"this"`
	// SpanMinutes: A value, in minutes, that indicates those values that SHOULD be in the
	// log. Events that occurred in the range of Now to (Now - SpanMinutes) MUST be in the
	// log and no others. Now is the GMT on the server.
	SpanMinutes uint32 `idl:"name:SpanMinutes" json:"span_minutes"`
}

type GenerateTimeSpanLogResponse struct {
	// That: ORPCTHAT structure that is used to return ORPC extension data to the client.
	That *dcom.ORPCThat `idl:"name:That" json:"that"`
	// LogFilePath: Has the same meaning as parameter LogFilePath for the GenerateClusterLog
	// method specified in section 3.12.4.1.
	LogFilePath *oaut.String `idl:"name:LogFilePath" json:"log_file_path"`
	// Return: The GenerateTimeSpanLog return value.
	Return int32 `idl:"name:Return" json:"return"`
}