vault-plugin-secrets-oauthapp

vault-plugin-secrets-oauthapp

This is a standalone backend plugin for use with HashiCorp Vault.

This plugin provides a secure wrapper around OAuth 2 authorization code, refresh token, device code, and client credentials grant types, allowing a Vault client to request authorization on behalf of a user and perform actions using a negotiated OAuth 2 access token.

Usage

Once you have the binary, you will need to register the plugin with Vault. Follow the instructions in the Vault documentation to add the plugin to the catalog. We will assume it is registered under the name oauthapp.

Mount the plugin at the path of your choosing:

$ vault secrets enable -path=oauth2/bitbucket oauthapp
Success! Enabled the oauthapp secrets engine at: oauth2/bitbucket/

Configure it with the necessary information to exchange tokens:

$ vault write oauth2/bitbucket/config \
    provider=bitbucket \
    client_id=aBcD3FgHiJkLmN0pQ \
    client_secret=AbCd3fGh1jK1MnoPqRs7uVwXYz
Success! Data written to: oauth2/bitbucket/config

Once the client secret has been written, it will never be exposed again.

Authorization code exchange flow

From a Vault client, request an authorization code URL:

$ vault write oauth2/bitbucket/config/auth_code_url state=foo scopes=bar,baz
Key    Value
---    -----
url    https://bitbucket.org/site/oauth2/authorize?client_id=aBcD3FgHiJkLmN0pQ&response_type=code&scope=bar+baz&state=foo

After redirecting the user to that URL and receiving the resulting temporary authorization code in your callback handler, you can create a permanent credential that automatically refreshes:

$ vault write oauth2/bitbucket/creds/my-user-auth code=zYxWvU7sRqP
Success! Data written to: oauth2/bitbucket/creds/my-user-auth

Assuming the refresh token remains valid, an access token is available any time at the same endpoint:

$ vault read oauth2/bitbucket/creds/my-user-auth
Key             Value
---             -----
access_token    nLlBg9Lmd7n1X96bw/xcW9HvyOHzxj19z3zXKv0XXxr8eLjQSerf4iyPDRCucSHQN+c7fnKhPsSWbWg0

Note that the client secret and refresh token are never exposed to Vault clients.

Alternatively, if a refresh token is obtained in some other way you can skip the auth_code_url step and pass the token directly to the creds write instead of the response code:

$ vault write oauth2/bitbucket/creds/my-user-auth \
    grant_type=refresh_token \
    refresh_token=TGUgZ3JpbGxlPw==
Success! Data written to: oauth2/bitbucket/creds/my-user-auth

Device code flow

The device code grant type allows a user to authenticate outside of a browser session. This plugin supports the device code flow and automatically handles polling the authorization server for a valid access token.

Not all providers support device code grants. Check the provider's documentation for more information.

To initiate the device code flow (this time using GitHub as an example):

$ vault write oauth2/github/creds/my-user-auth grant_type=urn:ietf:params:oauth:grant-type:device_code
Key                 Value
---                 -----
user_code           BDWD-HQPK
verification_uri    https://github.com/login/device
expire_time         2021-03-10T23:35:00.295229233Z

The plugin will manage the device code (similar to a refresh token) and will never present it to you. You should forward the user code and verification URL to the authorization subject for them to take action to log in.

Initially, when you try to read the credential back, you'll get an error letting you know the token is pending issuance because the user hasn't yet performed the required verification steps:

$ vault read oauth2/github/creds/my-user-auth
Error reading oauth2/github/creds/my-user-auth: Error making API request.

URL: GET http://localhost:8200/v1/oauth2/github/creds/my-user-auth
Code: 400. Errors:

* token pending issuance

However, within a few seconds of the user verifying their identity, you should see the access token:

$ vault read oauth2/github/creds/my-user-auth
Key             Value
---             -----
access_token    aGVsbG8gaGVsbG8gaGVsbG8K
expire_time     2021-03-27T00:15:38.72796606Z
type            Bearer

Client credentials flow

From a Vault client, simply read an arbitrary token using the self endpoints:

$ vault read oauth2/bitbucket/self/my-machine-auth
Key             Value
---             -----
access_token    SSBhbSBzbyBzbWFydC4gUy1NLVItVC4=
expire_time     2021-01-16T15:38:21.105335834Z
type            Bearer

You can configure the parameters of the identity provider's token endpoint if needed:

$ vault write oauth2/bitbucket/self/my-machine-auth/config \
    scopes=repositories:read
Success! Data written to: oauth2/bitbucket/self/my-machine-auth/config

Tips

For some operations, you may find that you need to provide a map of data for a field. When using the CLI, you can repeat the name of the field for each key-value pair of the map and use = to separate keys from values. For example:

$ vault write oauth2/oidc/config \
    provider_options=issuer_url=https://login.example.com \
    provider_options=extra_data_fields=id_token_claims

Endpoints

config

GET (read)

Retrieve the current configuration settings (except the client secret).

PUT (write)

Write new configuration settings. This endpoint completely replaces the existing configuration, so you must specify all required fields, even when updating.

Name	Description	Type	Default	Required
client_id	The OAuth 2.0 client ID.	String	None	Yes
client_secret	The OAuth 2.0 client secret.	String	None	No
auth_url_params	A map of additional query string parameters to provide to the authorization code URL.	Map of String🠦String	None	No
provider	The name of the provider to use. See the list of providers.	String	None	Yes
provider_options	Options to configure the specified provider.	Map of String🠦String	None	No

DELETE (delete)

Remove the current configuration. This does not invalidate any existing access tokens; however, you will not be able to create new tokens or refresh existing tokens.

config/auth_code_url

PUT (write)

Retrieve an authorization code URL for the given state. Some providers may not provide the plugin with information about this URL, in which case accessing this endpoint will return an error.

Name	Description	Type	Default	Required
auth_url_params	A map of additional query string parameters to provide to the authorization code URL. If any keys in this map conflict with the parameters stored in the configuration, the configuration's parameters take precedence.	Map of String🠦String	None	No
redirect_url	The URL to redirect to once the user has authorized this application.	String	None	No
scopes	A list of explicit scopes to request.	List of String	None	No
state	The unique state to send to the authorization URL.	String	None	Yes

creds/:name

This path is for tokens to be obtained using the OAuth 2.0 authorization code, refresh token, and device code flows.

GET (read)

Retrieve a current access token for the given credential. Reuses previous token if it is not yet expired or close to it. Otherwise, requests a new credential using the refresh_token grant type if possible.

Name	Description	Type	Default	Required
minimum_seconds	Minimum seconds before access token expires	Integer	*	No

* Defaults to underlying library default, which is 10 seconds unless the token expiration time is set to zero.

PUT (write)

Create or update a credential using a supported three-legged flow. This operation will make a request for a new credential using the specified grant type.

Name	Description	Type	Default	Required
grant_type	The grant type to use. Must be one of authorization_code, refresh_token, or urn:ietf:params:oauth:grant-type:device_code.	String	authorization_code*	No
provider_options	A list of options to pass on to the provider for configuring this token exchange.	Map of String🠦String	None	Refer to provider documentation

This operation takes additional fields depending on which grant type is chosen:

Name	Description	Type	Default	Required
code	The response code to exchange for a full token.	String	None	Yes
redirect_url	The same redirect URL as specified in the authorization code URL.	String	None	Refer to provider documentation

Name	Description	Type	Default	Required
refresh_token	The refresh token retrieved from the provider by some means external to this plugin.	String	None	Yes

Name	Description	Type	Default	Required
device_code	A device code that has already been retrieved. If not specified, a new device code will be retrieved.	String	None	No
scopes	If a device code is not specified, the scopes to request.	List of String	None	No

* For compatibility, if grant_type is not provided and refresh_token is set, the grant_type will default to refresh_token.

DELETE (delete)

Remove the credential information from storage.

self/:name

This path is for tokens to be obtained using the OAuth 2.0 client credentials flow.

GET (read)

Retrieve a current access token for the underlying OAuth 2.0 application. Reuses previous token if it is not yet expired or close to it. Otherwise, requests a new credential using the client_credentials grant type.

Name	Description	Type	Default	Required
minimum_seconds	Minimum seconds before access token expires	Integer	*	No

* Defaults to underlying library default, which is 10 seconds unless the token expiration time is set to zero.

DELETE (delete)

Remove the credential information from storage.

self/:name/config

GET (read)

Retrieve the configuration for the given credential, if any is present.

PUT (write)

Configure the credential for the given name. Writing configuration will cause a new token to be retrieved and validated using the client_credentials grant type.

Name	Description	Type	Default	Required
token_url_params	A map of additional query string parameters to provide to the token URL. If any keys in this map conflict with the parameters stored in the configuration, the configuration's parameters take precedence.	Map of String🠦String	None	No
scopes	A list of explicit scopes to request.	List of String	None	No

Providers

Bitbucket (bitbucket)

Documentation

GitHub (github)

Documentation

GitLab (gitlab)

Documentation

Google (google)

Documentation

Microsoft Azure AD (microsoft_azure_ad)

Documentation

Configuration options

Name	Description	Default	Required
tenant	The tenant to authenticate to.	None	Yes

OpenID Connect (oidc)

This provider implements the OpenID Connect protocol version 1.0.

Documentation

Configuration options

Name	Description	Default	Required
issuer_url	The URL to an issuer of OpenID JWTs with an accessible .well-known/openid-configuration resource.	None	Yes
extra_data_fields	A comma-separated list of subject fields to expose in the credential endpoint. Valid fields are id_token, id_token_claims, and user_info.	None	No

Credential exchange options

Name	Description	Default	Required
nonce	The same nonce as specified in the authorization code URL.	None	If present in the authorization code URL

Slack (slack)

Documentation

Custom (custom)

This provider allows you to specify the required endpoints for negotiating an arbitrary OAuth 2 authorization code grant flow.

Configuration options

Name	Description	Default	Required
auth_code_url	The URL to submit the initial authorization code request to.	None	No
device_code_url	The URL to subject a device authorization request to.	None	No
token_url	The URL to use for exchanging temporary codes and refreshing access tokens.	None	Yes
auth_style	How to authenticate to the token URL. If specified, must be one of in_header or in_params.	Automatically detect	No