io

package
v0.0.0-...-a027466 Latest Latest
Warning

This package is not in the latest version of its module.

Go to latest
Published: Jun 7, 2017 License: BSD-3-Clause Imports: 2 Imported by: 0

Documentation

Overview

Package io provides basic interfaces to I/O primitives. Its primary job is to wrap existing implementations of such primitives, such as those in package os, into shared public interfaces that abstract the functionality, plus some other related primitives.

Because these interfaces and primitives wrap lower-level operations with various implementations, unless otherwise informed clients should not assume they are safe for parallel execution.

Index

Examples

Constants

View Source
const (
	SeekStart   = 0 // seek relative to the origin of the file
	SeekCurrent = 1 // seek relative to the current offset
	SeekEnd     = 2 // seek relative to the end
)

Seek whence values.

Variables

View Source
var EOF = errors.New("EOF")

EOF is the error returned by Read when no more input is available. Functions should return EOF only to signal a graceful end of input. If the EOF occurs unexpectedly in a structured data stream, the appropriate error is either ErrUnexpectedEOF or some other error giving more detail.

View Source
var ErrClosedPipe = errors.New("io: read/write on closed pipe")

ErrClosedPipe is the error used for read or write operations on a closed pipe.

View Source
var ErrNoProgress = errors.New("multiple Read calls return no data or error")

ErrNoProgress is returned by some clients of an io.Reader when many calls to Read have failed to return any data or error, usually the sign of a broken io.Reader implementation.

View Source
var ErrShortBuffer = errors.New("short buffer")

ErrShortBuffer means that a read required a longer buffer than was provided.

View Source
var ErrShortWrite = errors.New("short write")

ErrShortWrite means that a write accepted fewer bytes than requested but failed to return an explicit error.

View Source
var ErrUnexpectedEOF = errors.New("unexpected EOF")

ErrUnexpectedEOF means that EOF was encountered in the middle of reading a fixed-size block or data structure.

Functions

func Copy

func Copy(dst Writer, src Reader) (written int64, err error)

Copy copies from src to dst until either EOF is reached on src or an error occurs. It returns the number of bytes copied and the first error encountered while copying, if any.

A successful Copy returns err == nil, not err == EOF. Because Copy is defined to read from src until EOF, it does not treat an EOF from Read as an error to be reported.

If src implements the WriterTo interface, the copy is implemented by calling src.WriteTo(dst). Otherwise, if dst implements the ReaderFrom interface, the copy is implemented by calling dst.ReadFrom(src).

Example
package main

import (
	"io"
	"log"
	"os"
	"strings"
)

func main() {
	r := strings.NewReader("some io.Reader stream to be read\n")

	if _, err := io.Copy(os.Stdout, r); err != nil {
		log.Fatal(err)
	}

}
Output:

some io.Reader stream to be read

func CopyBuffer

func CopyBuffer(dst Writer, src Reader, buf []byte) (written int64, err error)

CopyBuffer is identical to Copy except that it stages through the provided buffer (if one is required) rather than allocating a temporary one. If buf is nil, one is allocated; otherwise if it has zero length, CopyBuffer panics.

Example
package main

import (
	"io"
	"log"
	"os"
	"strings"
)

func main() {
	r1 := strings.NewReader("first reader\n")
	r2 := strings.NewReader("second reader\n")
	buf := make([]byte, 8)

	// buf is used here...
	if _, err := io.CopyBuffer(os.Stdout, r1, buf); err != nil {
		log.Fatal(err)
	}

	// ... reused here also. No need to allocate an extra buffer.
	if _, err := io.CopyBuffer(os.Stdout, r2, buf); err != nil {
		log.Fatal(err)
	}

}
Output:

first reader
second reader

func CopyN

func CopyN(dst Writer, src Reader, n int64) (written int64, err error)

CopyN copies n bytes (or until an error) from src to dst. It returns the number of bytes copied and the earliest error encountered while copying. On return, written == n if and only if err == nil.

If dst implements the ReaderFrom interface, the copy is implemented using it.

Example
package main

import (
	"io"
	"log"
	"os"
	"strings"
)

func main() {
	r := strings.NewReader("some io.Reader stream to be read")

	if _, err := io.CopyN(os.Stdout, r, 5); err != nil {
		log.Fatal(err)
	}

}
Output:

some

func Pipe

func Pipe() (*PipeReader, *PipeWriter)

Pipe creates a synchronous in-memory pipe. It can be used to connect code expecting an io.Reader with code expecting an io.Writer.

Reads and Writes on the pipe are matched one to one except when multiple Reads are needed to consume a single Write. That is, each Write to the PipeWriter blocks until it has satisfied one or more Reads from the PipeReader that fully consume the written data. The data is copied directly from the Write to the corresponding Read (or Reads); there is no internal buffering.

It is safe to call Read and Write in parallel with each other or with Close. Parallel calls to Read and parallel calls to Write are also safe: the individual calls will be gated sequentially.

func ReadAtLeast

func ReadAtLeast(r Reader, buf []byte, min int) (n int, err error)

ReadAtLeast reads from r into buf until it has read at least min bytes. It returns the number of bytes copied and an error if fewer bytes were read. The error is EOF only if no bytes were read. If an EOF happens after reading fewer than min bytes, ReadAtLeast returns ErrUnexpectedEOF. If min is greater than the length of buf, ReadAtLeast returns ErrShortBuffer. On return, n >= min if and only if err == nil.

Example
package main

import (
	"fmt"
	"io"
	"log"
	"strings"
)

func main() {
	r := strings.NewReader("some io.Reader stream to be read\n")

	buf := make([]byte, 33)
	if _, err := io.ReadAtLeast(r, buf, 4); err != nil {
		log.Fatal(err)
	}
	fmt.Printf("%s\n", buf)

	// buffer smaller than minimal read size.
	shortBuf := make([]byte, 3)
	if _, err := io.ReadAtLeast(r, shortBuf, 4); err != nil {
		fmt.Println("error:", err)
	}

	// minimal read size bigger than io.Reader stream
	longBuf := make([]byte, 64)
	if _, err := io.ReadAtLeast(r, longBuf, 64); err != nil {
		fmt.Println("error:", err)
	}

}
Output:

some io.Reader stream to be read

error: short buffer
error: EOF

func ReadFull

func ReadFull(r Reader, buf []byte) (n int, err error)

ReadFull reads exactly len(buf) bytes from r into buf. It returns the number of bytes copied and an error if fewer bytes were read. The error is EOF only if no bytes were read. If an EOF happens after reading some but not all the bytes, ReadFull returns ErrUnexpectedEOF. On return, n == len(buf) if and only if err == nil.

Example
package main

import (
	"fmt"
	"io"
	"log"
	"strings"
)

func main() {
	r := strings.NewReader("some io.Reader stream to be read\n")

	buf := make([]byte, 4)
	if _, err := io.ReadFull(r, buf); err != nil {
		log.Fatal(err)
	}
	fmt.Printf("%s\n", buf)

	// minimal read size bigger than io.Reader stream
	longBuf := make([]byte, 64)
	if _, err := io.ReadFull(r, longBuf); err != nil {
		fmt.Println("error:", err)
	}

}
Output:

some
error: unexpected EOF

func WriteString

func WriteString(w Writer, s string) (n int, err error)

WriteString writes the contents of the string s to w, which accepts a slice of bytes. If w implements a WriteString method, it is invoked directly. Otherwise, w.Write is called exactly once.

Example
package main

import (
	"io"
	"os"
)

func main() {
	io.WriteString(os.Stdout, "Hello World")

}
Output:

Hello World

Types

type ByteReader

type ByteReader interface {
	ReadByte() (byte, error)
}

ByteReader is the interface that wraps the ReadByte method.

ReadByte reads and returns the next byte from the input.

type ByteScanner

type ByteScanner interface {
	ByteReader
	UnreadByte() error
}

ByteScanner is the interface that adds the UnreadByte method to the basic ReadByte method.

UnreadByte causes the next call to ReadByte to return the same byte as the previous call to ReadByte. It may be an error to call UnreadByte twice without an intervening call to ReadByte.

type ByteWriter

type ByteWriter interface {
	WriteByte(c byte) error
}

ByteWriter is the interface that wraps the WriteByte method.

type Closer

type Closer interface {
	Close() error
}

Closer is the interface that wraps the basic Close method.

The behavior of Close after the first call is undefined. Specific implementations may document their own behavior.

type LimitedReader

type LimitedReader struct {
	R Reader // underlying reader
	N int64  // max bytes remaining
}

A LimitedReader reads from R but limits the amount of data returned to just N bytes. Each call to Read updates N to reflect the new amount remaining. Read returns EOF when N <= 0 or when the underlying R returns EOF.

func (*LimitedReader) Read

func (l *LimitedReader) Read(p []byte) (n int, err error)

type PipeReader

type PipeReader struct {
	// contains filtered or unexported fields
}

A PipeReader is the read half of a pipe.

func (*PipeReader) Close

func (r *PipeReader) Close() error

Close closes the reader; subsequent writes to the write half of the pipe will return the error ErrClosedPipe.

func (*PipeReader) CloseWithError

func (r *PipeReader) CloseWithError(err error) error

CloseWithError closes the reader; subsequent writes to the write half of the pipe will return the error err.

func (*PipeReader) Read

func (r *PipeReader) Read(data []byte) (n int, err error)

Read implements the standard Read interface: it reads data from the pipe, blocking until a writer arrives or the write end is closed. If the write end is closed with an error, that error is returned as err; otherwise err is EOF.

type PipeWriter

type PipeWriter struct {
	// contains filtered or unexported fields
}

A PipeWriter is the write half of a pipe.

func (*PipeWriter) Close

func (w *PipeWriter) Close() error

Close closes the writer; subsequent reads from the read half of the pipe will return no bytes and EOF.

func (*PipeWriter) CloseWithError

func (w *PipeWriter) CloseWithError(err error) error

CloseWithError closes the writer; subsequent reads from the read half of the pipe will return no bytes and the error err, or EOF if err is nil.

CloseWithError always returns nil.

func (*PipeWriter) Write

func (w *PipeWriter) Write(data []byte) (n int, err error)

Write implements the standard Write interface: it writes data to the pipe, blocking until one or more readers have consumed all the data or the read end is closed. If the read end is closed with an error, that err is returned as err; otherwise err is ErrClosedPipe.

type ReadCloser

type ReadCloser interface {
	Reader
	Closer
}

ReadCloser is the interface that groups the basic Read and Close methods.

type ReadSeeker

type ReadSeeker interface {
	Reader
	Seeker
}

ReadSeeker is the interface that groups the basic Read and Seek methods.

type ReadWriteCloser

type ReadWriteCloser interface {
	Reader
	Writer
	Closer
}

ReadWriteCloser is the interface that groups the basic Read, Write and Close methods.

type ReadWriteSeeker

type ReadWriteSeeker interface {
	Reader
	Writer
	Seeker
}

ReadWriteSeeker is the interface that groups the basic Read, Write and Seek methods.

type ReadWriter

type ReadWriter interface {
	Reader
	Writer
}

ReadWriter is the interface that groups the basic Read and Write methods.

type Reader

type Reader interface {
	Read(p []byte) (n int, err error)
}

Reader is the interface that wraps the basic Read method.

Read reads up to len(p) bytes into p. It returns the number of bytes read (0 <= n <= len(p)) and any error encountered. Even if Read returns n < len(p), it may use all of p as scratch space during the call. If some data is available but not len(p) bytes, Read conventionally returns what is available instead of waiting for more.

When Read encounters an error or end-of-file condition after successfully reading n > 0 bytes, it returns the number of bytes read. It may return the (non-nil) error from the same call or return the error (and n == 0) from a subsequent call. An instance of this general case is that a Reader returning a non-zero number of bytes at the end of the input stream may return either err == EOF or err == nil. The next Read should return 0, EOF.

Callers should always process the n > 0 bytes returned before considering the error err. Doing so correctly handles I/O errors that happen after reading some bytes and also both of the allowed EOF behaviors.

Implementations of Read are discouraged from returning a zero byte count with a nil error, except when len(p) == 0. Callers should treat a return of 0 and nil as indicating that nothing happened; in particular it does not indicate EOF.

Implementations must not retain p.

func LimitReader

func LimitReader(r Reader, n int64) Reader

LimitReader returns a Reader that reads from r but stops with EOF after n bytes. The underlying implementation is a *LimitedReader.

Example
package main

import (
	"io"
	"log"
	"os"
	"strings"
)

func main() {
	r := strings.NewReader("some io.Reader stream to be read\n")
	lr := io.LimitReader(r, 4)

	if _, err := io.Copy(os.Stdout, lr); err != nil {
		log.Fatal(err)
	}

}
Output:

some

func MultiReader

func MultiReader(readers ...Reader) Reader

MultiReader returns a Reader that's the logical concatenation of the provided input readers. They're read sequentially. Once all inputs have returned EOF, Read will return EOF. If any of the readers return a non-nil, non-EOF error, Read will return that error.

Example
package main

import (
	"io"
	"log"
	"os"
	"strings"
)

func main() {
	r1 := strings.NewReader("first reader ")
	r2 := strings.NewReader("second reader ")
	r3 := strings.NewReader("third reader\n")
	r := io.MultiReader(r1, r2, r3)

	if _, err := io.Copy(os.Stdout, r); err != nil {
		log.Fatal(err)
	}

}
Output:

first reader second reader third reader

func TeeReader

func TeeReader(r Reader, w Writer) Reader

TeeReader returns a Reader that writes to w what it reads from r. All reads from r performed through it are matched with corresponding writes to w. There is no internal buffering - the write must complete before the read completes. Any error encountered while writing is reported as a read error.

Example
package main

import (
	"bytes"
	"fmt"
	"io"
	"io/ioutil"
	"log"
	"strings"
)

func main() {
	r := strings.NewReader("some io.Reader stream to be read\n")
	var buf bytes.Buffer
	tee := io.TeeReader(r, &buf)

	printall := func(r io.Reader) {
		b, err := ioutil.ReadAll(r)
		if err != nil {
			log.Fatal(err)
		}

		fmt.Printf("%s", b)
	}

	printall(tee)
	printall(&buf)

}
Output:

some io.Reader stream to be read
some io.Reader stream to be read

type ReaderAt

type ReaderAt interface {
	ReadAt(p []byte, off int64) (n int, err error)
}

ReaderAt is the interface that wraps the basic ReadAt method.

ReadAt reads len(p) bytes into p starting at offset off in the underlying input source. It returns the number of bytes read (0 <= n <= len(p)) and any error encountered.

When ReadAt returns n < len(p), it returns a non-nil error explaining why more bytes were not returned. In this respect, ReadAt is stricter than Read.

Even if ReadAt returns n < len(p), it may use all of p as scratch space during the call. If some data is available but not len(p) bytes, ReadAt blocks until either all the data is available or an error occurs. In this respect ReadAt is different from Read.

If the n = len(p) bytes returned by ReadAt are at the end of the input source, ReadAt may return either err == EOF or err == nil.

If ReadAt is reading from an input source with a seek offset, ReadAt should not affect nor be affected by the underlying seek offset.

Clients of ReadAt can execute parallel ReadAt calls on the same input source.

Implementations must not retain p.

type ReaderFrom

type ReaderFrom interface {
	ReadFrom(r Reader) (n int64, err error)
}

ReaderFrom is the interface that wraps the ReadFrom method.

ReadFrom reads data from r until EOF or error. The return value n is the number of bytes read. Any error except io.EOF encountered during the read is also returned.

The Copy function uses ReaderFrom if available.

type RuneReader

type RuneReader interface {
	ReadRune() (r rune, size int, err error)
}

RuneReader is the interface that wraps the ReadRune method.

ReadRune reads a single UTF-8 encoded Unicode character and returns the rune and its size in bytes. If no character is available, err will be set.

type RuneScanner

type RuneScanner interface {
	RuneReader
	UnreadRune() error
}

RuneScanner is the interface that adds the UnreadRune method to the basic ReadRune method.

UnreadRune causes the next call to ReadRune to return the same rune as the previous call to ReadRune. It may be an error to call UnreadRune twice without an intervening call to ReadRune.

type SectionReader

type SectionReader struct {
	// contains filtered or unexported fields
}

SectionReader implements Read, Seek, and ReadAt on a section of an underlying ReaderAt.

Example
package main

import (
	"io"
	"log"
	"os"
	"strings"
)

func main() {
	r := strings.NewReader("some io.Reader stream to be read\n")
	s := io.NewSectionReader(r, 5, 17)

	if _, err := io.Copy(os.Stdout, s); err != nil {
		log.Fatal(err)
	}

}
Output:

io.Reader stream

func NewSectionReader

func NewSectionReader(r ReaderAt, off int64, n int64) *SectionReader

NewSectionReader returns a SectionReader that reads from r starting at offset off and stops with EOF after n bytes.

func (*SectionReader) Read

func (s *SectionReader) Read(p []byte) (n int, err error)

func (*SectionReader) ReadAt

func (s *SectionReader) ReadAt(p []byte, off int64) (n int, err error)
Example
package main

import (
	"fmt"
	"io"
	"log"
	"strings"
)

func main() {
	r := strings.NewReader("some io.Reader stream to be read\n")
	s := io.NewSectionReader(r, 5, 16)

	buf := make([]byte, 6)
	if _, err := s.ReadAt(buf, 10); err != nil {
		log.Fatal(err)
	}

	fmt.Printf("%s\n", buf)

}
Output:

stream

func (*SectionReader) Seek

func (s *SectionReader) Seek(offset int64, whence int) (int64, error)
Example
package main

import (
	"fmt"
	"io"
	"log"
	"strings"
)

func main() {
	r := strings.NewReader("some io.Reader stream to be read\n")
	s := io.NewSectionReader(r, 5, 16)

	if _, err := s.Seek(10, io.SeekStart); err != nil {
		log.Fatal(err)
	}

	buf := make([]byte, 6)
	if _, err := s.Read(buf); err != nil {
		log.Fatal(err)
	}

	fmt.Printf("%s\n", buf)

}
Output:

stream

func (*SectionReader) Size

func (s *SectionReader) Size() int64

Size returns the size of the section in bytes.

type Seeker

type Seeker interface {
	Seek(offset int64, whence int) (int64, error)
}

Seeker is the interface that wraps the basic Seek method.

Seek sets the offset for the next Read or Write to offset, interpreted according to whence: SeekStart means relative to the start of the file, SeekCurrent means relative to the current offset, and SeekEnd means relative to the end. Seek returns the new offset relative to the start of the file and an error, if any.

Seeking to an offset before the start of the file is an error. Seeking to any positive offset is legal, but the behavior of subsequent I/O operations on the underlying object is implementation-dependent.

type WriteCloser

type WriteCloser interface {
	Writer
	Closer
}

WriteCloser is the interface that groups the basic Write and Close methods.

type WriteSeeker

type WriteSeeker interface {
	Writer
	Seeker
}

WriteSeeker is the interface that groups the basic Write and Seek methods.

type Writer

type Writer interface {
	Write(p []byte) (n int, err error)
}

Writer is the interface that wraps the basic Write method.

Write writes len(p) bytes from p to the underlying data stream. It returns the number of bytes written from p (0 <= n <= len(p)) and any error encountered that caused the write to stop early. Write must return a non-nil error if it returns n < len(p). Write must not modify the slice data, even temporarily.

Implementations must not retain p.

func MultiWriter

func MultiWriter(writers ...Writer) Writer

MultiWriter creates a writer that duplicates its writes to all the provided writers, similar to the Unix tee(1) command.

Example
package main

import (
	"bytes"
	"fmt"
	"io"
	"log"
	"strings"
)

func main() {
	r := strings.NewReader("some io.Reader stream to be read\n")

	var buf1, buf2 bytes.Buffer
	w := io.MultiWriter(&buf1, &buf2)

	if _, err := io.Copy(w, r); err != nil {
		log.Fatal(err)
	}

	fmt.Print(buf1.String())
	fmt.Print(buf2.String())

}
Output:

some io.Reader stream to be read
some io.Reader stream to be read

type WriterAt

type WriterAt interface {
	WriteAt(p []byte, off int64) (n int, err error)
}

WriterAt is the interface that wraps the basic WriteAt method.

WriteAt writes len(p) bytes from p to the underlying data stream at offset off. It returns the number of bytes written from p (0 <= n <= len(p)) and any error encountered that caused the write to stop early. WriteAt must return a non-nil error if it returns n < len(p).

If WriteAt is writing to a destination with a seek offset, WriteAt should not affect nor be affected by the underlying seek offset.

Clients of WriteAt can execute parallel WriteAt calls on the same destination if the ranges do not overlap.

Implementations must not retain p.

type WriterTo

type WriterTo interface {
	WriteTo(w Writer) (n int64, err error)
}

WriterTo is the interface that wraps the WriteTo method.

WriteTo writes data to w until there's no more data to write or when an error occurs. The return value n is the number of bytes written. Any error encountered during the write is also returned.

The Copy function uses WriterTo if available.

Directories

Path Synopsis
Package ioutil implements some I/O utility functions.
Package ioutil implements some I/O utility functions.

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL